Design and application of self-adaptive feedback compensation controller based on Dynamic Recurrent Neural Network 基于DRNN自适应反馈补偿控制器设计与应用
Optimal Design of Boost APFC Feedback Compensation Network BoostAPFC电路反馈补偿网络的优化设计
Design on Laser Power and Temperature Feedback Compensation System Based on ARM 基于ARM系统激光器的温度和功率反馈补偿系统的设计
Study on Energy Saving of Air Conditioning System Based on Flexible ILC with Feedback Compensation 基于柔性迭代学习控制和反馈补偿的空调系统节能策略
Self-adaptive Feedback Compensation Controller Based on Diagonal Recurrent Neural Network 基于对角递归网络的自适应反馈补偿控制器
The DC sensing theory and method based on magnetic potential self-balance and feedback compensation are studied in this paper. 本论文研究了一种基于开环原理与闭环原理相结合的磁势自平衡回馈补偿式直流传感机理与方法及其实现。
Besides, feedback compensation is used to compensate the irregular disturbance in the system. 同时,针对空调系统中可能出现较大非规律性扰动,采取了反馈补偿的措施。
Research of Double Valve Feedback Compensation Control in Fin Stabilizer Load System 双阀反馈补偿控制在减摇鳍加载系统中的研究
Thebase for this approach is feedback compensation principle. 这种方法的基本出发点是互补反馈原理。
Visual closed loop control is accomplished by integrating the joint positioning control with dynamic pose feedback compensation. 采用一种基于关节空间控制和位姿空间动态补偿综合的机器人视觉闭环控制方法,并设计了动态校正控制算法。
Based on two classical structures of decoupling system, a control system consisting of a feedback compensation decoupling control and PID control is proposed to solve the multivariable coupling problem of the gas temperature and flux in a combustion system. 针对某燃烧系统中温度、流量耦合的特点,基于两种典型的解耦系统结构,设计了一类前置反馈补偿解耦控制和PID控制相结合的控制系统。
A novel dynamic feedback compensation design was proposed for anti-windup. 将非线性环节嵌入线性控制器的互质因子中,提出了一种基于线性矩阵不等式(LMI)的动态反馈抗饱和补偿设计方法。
This paper first introduces new technology on redundant TT-VGT robot, BP neural network and permanent magnet AC synchronous motor. Then establishes the model of motion control system based on BP neural network, and the mathematical model of position feedback compensation subsystem. Finally makes system simulation. 介绍了有关冗余度TT-VGT机器人、BP神经网络控制及永磁交流同步电动机的先进技术,建立了BP神经网络运动控制系统模型和位置反馈补偿子系统的数学模型,并进行了系统仿真。
Application of the Fuzzy Self-adaptive PID Feedback Compensation Controller in Steel Rolling Control System 模糊自适应PID反馈补偿控制在轧钢控制系统中的应用
A PID feedback compensation control strategy is presented to solve this problem. The simulation results show this method can reach better effect and disturbance restraint for the system is increased. An approach for improving middle-convex and varying ellipse piston machining precision is presented. 为解决此问题提出了一种PID反馈补偿控制策略,仿真结果表明该控制方法可以达到较好的控制效果,增加了系统的抗扰性,为提高中凸变椭圆活塞加工精度提供了一条途径。
To make the dynamic response speed quicker, an algorithm with feedback compensation was presented. 为了加快动态响应速度,文中提出了反馈补偿算法并进行了详细的分析。
In this paper, the design of a feedback compensation control system for reaction wheel of torque mode is introduced. 介绍了反作用飞轮力矩模式反馈补偿控制系统的设计。
Propose a robust PI controller with position internal feedback compensation ( PIP). 提出了鲁棒的内模补偿控制器I-PIP。
The Analysis of the Servo System Characteristics with Dynamic Feedback Compensation 基于动态反馈补偿的随动系统特性分析
There are recursive integral controller and the APF output voltage feedback compensating control, which realize harmonic current feedback compensation and APF minimum operation VA rating control. 复合控制器中引入了递推积分器和有源滤波器输出电压反馈校正控制,实现了谐波反馈补偿控制及有源滤波器最小运行容量控制。
Some concepts of reliability estimation and reliability design are introduced. The reliability model of DC sensor based on self-balance of magnetic potential and feedback compensation is presented. 介绍了可靠性预计与可靠性设计的若干概念,提出了磁势自平衡回馈补偿式直流传感器的可靠性模型。
In this paper, an electrohydraulic control system with pressure compensation and speed closed-loop feedback compensation is desigened to solve the problem, and has achieved good results in actual application. 本文设计了一种压力补偿和电液闭环速度反馈补偿相结合的电液控制系统,较好地解决了这一问题,在实际应用中取得了满意的效果。
Study on Servo System with Dynamic Feedback Compensation 一类具有动态反馈补偿通道的随动系统的研究
This paper presents a kind of nonlinear adaptive inverse control with-filtered algorithm, which has adaptive disturbance canceler and feedback compensation in it. 提出了一种带自适应扰动消除器和反馈补偿的非线性自适应逆控制系统。
Based on the establishment of mathematical model of flywheel and the analysis of disturbance and noise, the feedback compensation control system is designed. 首先建立了反作用飞轮数学模型,并分析了摩擦力矩干扰和速率测量噪声的特性,在此基础上进行了反馈补偿控制的设计。
A Way of Designing a Control System by Using Feedback Compensation 控制系统的反馈校正设计方法
In addition, feedforward gain stage is proposed in this paper, which effective controls Q value of the non-dominant pole, so at high frequency negative feedback compensation loop is ensured. 除此之外该论文里的运放增加了前馈增益级,这样就有效的控制了非主极点的Q值,保证了高频时补偿环路是负反馈的。
Then dead-time effect on output precision of inverter was analysed. A compensation method of dead-time effect, namely, current feedback compensation method was proposed. 接着,分析了逆变器的死区效应对输出精度的影响,提出了一种死区效应补偿方法一电流反馈死区补偿法,并对该方法进行了相关实验验证。
The experimental data shows, among the three compensations the successive flux feedback compensation has the best performance, for the successive flux feedback compensation has added the compensation to the demagnetization process of the magnetic hysteresis loop. 实验数据表明三种补偿方式中逐次通量反馈补偿技术效果最好,这是因为逐次通量反馈补偿增加了对磁滞回线中的退磁过程进行了补偿。
This paper design adaptive modeling, adaptive inverse modeling and controller which has adaptive disturbance canceller and feedback compensation in it. 给出了一种结构新颖的非线性自适应滤波器进行自适应建模、逆建模及控制器的设计方法;提出了一种带自适应扰动消除器和反馈补偿的非线性自适应逆控制系统。